Server Data Recovery

Server Data Recovery

Lost Important Data? We can help!

Get reliable and cost-effective server data recovery service for the RAID, NAS san says SCSI supporting all OS and server brands. No other situation of data loss is terrifying than losing data on a corporate or business server. Server crashes, software corruption, and other data loss can result in a huge cost and loss for businesses small and big alike. When no data backups exist, data recovery can become the only way to bring business back on feet. Our data recovery experts have been engaged in recovering mission-critical data of countless businesses and individuals from all server platforms and architectures, including RAID, NAS, SAN, tape, and others, including servers hosted on virtual machines, including VMWare, Virtual Server, Hyper-V, Xen Server, and others of all brands and manufacturers. We are proud to be the data recovery service provider of choice for many IT professionals and businesses. Our clients in the past include Defence Research and Development Organisation (DRDO), Police department, Municipal Corporation of Greater Mumbai(MCGM), and other governmental agencies as well as few corporate giants of India. If your server is crashed due to any reasons, don’t waste a minute, Immediately Contact us and let our data recovery experts evaluate your situation. After our free evaluation, we will provide you with a full diagnostic report detailing what we are able to recover. You will be fully aware of all your options before making a decision to proceed with the services. All data recovery work is at our secured and state of the art centrally located lab facilities in Mumbai.

Server Data recovery process

Servers can lose data for many of the same reasons that ordinary personal computers do, but their additional complexity in setting up and functionality exposes them to an even wider variety of data loss hazards. Most frequently, configuration errors failed migration of data, and software installation or updates are the main culprits. However, servers also have a greater vulnerability to virus infections and other malicious attacks. Once we discover the root cause of the problem, we try to determine exactly how much and which data we would be able to recover. After we perform our evaluation, we provide you with a report detailing what we will be able to recover and what further action will need to be taken by our team to recover your data. If you are satisfied with our report and give us your permission to proceed, we will perform the actual recovery. Data loss often is the stressful ordeal and alarmingly nerve-racking situations arise out of it. We understand the hell-like situations that a client goes through and that is very reason of The CyberTech working round the clock, in the fastest but safest and surest methods to bring data back and put a smile back on your face.

right

Our Engineers Can Recover Data from All The Mentioned Causes of Server/RAID Data Loss Situations:

  • Damaged or Lost RAID  Configurations
  • Failed Software or Operating  System Upgrade
  • Corrupt or Damaged Partition Table
  • Drive Not Booting – Missing  or Deleted  File/Directory
  • Inaccessible Drive
  • RAID Controller Failure
  • Rebuild RAID Failure
  • Formatted Drive
  • Multiple Hard Drive Crashes
  • Fire/Flood Damage
  • Virus infection
  • Natural disasters
  • Multiple Hard Drive Crashes
  • Damaged Striping
  • Power loss or surges
  • Mechanical failure
  • Hardware / Software malfunction
  • Virus infection
  • Software and operating  system  upgrades
  • Two or more hard drives fail or go offline configuration
  • Failure of RAID controller or change  in the RAID
  • Server crashes and fails to mount  volumes/ partitions
  • Addition of incompatible hard  drives to the array

Common Server configurations from where we successfully recovered data:

  • RAID levels 0-7, RAID 10, RAID 53
  • Hardware and software RAID  configurations
  • SCSI RAID device
  • IDE RAID device
  • Striped disk arrayMirror sets
  • Spanned volumes
  • Simple volumes
  • NAS Devices
  • SAN single drive and ARRAY
  • File, Application, Mail, and  Web Server
  • Fibre Channel
  • Basic disk & dynamic disk

Server Operating System supported for data recovery:

  • Windows 2000/NT Server
    (FAT16/FAT32/NTFS /NTFS 5)
  • Novell Netware (NSS/UFS/NWFS)
  • Apple Macintosh (MFS/HFS/HFS+)
  • Exchange Server
  • MS-SQL Server
  • UNIX SCO OpenServer and Xenix
  • UNIX SOLARIS (SUN) 
    UNIX BSD/FreeBSD, QNX.
  • UNIX HPUX (HP)
  • UNIXIRIX (SGI)
  • UNIX AIX (IBM RS/6000)
  • LINUX (EXT2FS/EXT3FS/RESIZEFS)
  • LINUX (LVM/IBM EVMS)

Common Symptoms of Server  crash:

  • Inaccessible boot device
  • Unable to access drive “X”
  • Device not ready, reading drive “X”
  • Grinding or clacking noises, normally associated with electro-mechanical failure
  • The drive reports bad sectors
  • Corrupt Data
  • Formatted, Fdisked, partially re-loaded hard disk drives.
  • NTLDR is missing
  • Server won’t boot
  • Corrupted parity/data drive
  • Accidental/Intentional deleted  partition
  • RAID Controller failure
  • Array  Rebuilds
  • Media surface damage
  • Single Drive Failure
  • Crashed hard drive
  • Damage and Contamination  of media surface
  • The drive no longer recognized  by the BIOS  after rebooting,  despite the platters spinning
  • Operating system not found  / missing operating system
  • Multiple Drive Failure
  • The BIOS recognizes the drive but with garbage parameters
  • The BIOS recognises the drive but the data is inaccessible
  • Multiple drive or component  failure
  • Improper Drive or Media replacement
  • Fire/Water Damage
  • Server does not boot
  • Drives and partitions are not  accessible
  • Applications doesn’t run or  data is not displayed
  • Files or data corruption
  • Worm or Virus attack
  • Component failure in hard disk
  • Primary hard disk failure
  • RAID device not ready
  • Damage caused to fire, water  or heavy voltage fluctuations

Potential Reasons for Server Data Recovery:

Our dedicated RAID data recovery team of and RAID engineers are trained to handle all of the current server hardware platforms as well as commonly used legacy systems utilized in the market today. Complex fault-tolerant systems can also suffer from a crash. Often, failure to correctly implement these systems leads to point of malfunction and can cause data loss. This is human error and not shortcomings of the technology used or the design of the array. Even the best-configured system can fail due to RAID Controller failure, multiple drive failure, accidental replacement of media components, accidental reformatting of drives or whole array, array configuration lost, intermittent drive failure resulting in array degradation. The CyberTech’s RAID Array Data Recovery in-lab and critical response services provide state-of-the-art data recovery services for all Redundant Array of Independent Drive (RAID) configurations, for all brands, media formats and/or Operating Systems.

  • Disk Reformatting/Accidental  Deletion
  • Mechanical Hard Drive Failures
  • Head Crash Causing Platter Damage
  • Virus/Malware
  • Deleted Files and Partitions
  • Blue Screen Of Death
  • File Overwrites
  • Physical Damage From Fire or Flood
  • Software Corruption

Our Professional RAID Data Recovery Services:

  • RAID 0 – Stripe Set without parity.
  • RAID 5 – Stripe Set with parity.
  • RAID 1 – Mirroring / Duplexing.
  • Other RAID combinations such  as RAID 0+1, RAID 5+0, RAID 5+1 etc.

RAID Array Levels

  • RAID 0
  • RAID 0+1
  • RAID 1
  • RAID 1E
  • RAID 3
  • RAID 4
  • RAID 5
  • RAID 5E
  • RAID 5EE
  • RAID 6
  • RAID 10
  • RAID 50
  • RAID 51
  • RAID 60
  • RAID ADG

RAID Array Hard Drive Types

  • IDE/ATA/PATA/EIDE
  • ULTRA/ATA 100
  • SAS
  • SCSI
  • ESDI
  • Fibre Channel  
  • USB
  • Firewire
  • PCMCIA
  • RLL
  • iSCSI
  • eSATA
  • SATA II/2.0
  • SATA
  • MFM

RAID Data Recovery for Server Makesand Media

  • All ProLiant Series
  • All PowerEdge Series
  • ProLiant (CPQ)
  • Integrity
  • AlphaServer
  • e3000
  • IBM XSeries, Unix AIX, PSeries Entire 
    line of product
  • All Intel and AMD product lines
  • Entire RAID Product line
  • All other brands and formats

RAID SYSTEMS

  • Compaq RAID Recovery- All   ProLiant Series
  • Dell RAID Recovery – All  PowerEdge Series
  • IBM RAID Recovery – IBM XSeries
  • HP RAID Recovery: ProLiant (CPQ),  HP Integrity, HP NetServers
  • Apple RAID Recovery XServes, XSAN , Apple RAID
  • Gateway RAID Recovery Servers
  • EMC RAID Recovery
  • NetApp RAID Recovery – Network  Appliance Filers
  • Quantum RAID Recovery Snap  Servers
  • LaCie RAID Recovery Portable RAIDs
  • Buffalo RAID Recovery NAS/RAID  Server
  • Sun Microsystems RAID Recovery  – All Servers & RAIDs
  • All Intel and AMD, I386 and  RISC servers & RAIDs Operating Systems and Platforms.

RAID CARDS

  • Perc RAID Card Recovery
  • LSI RAID Card Recovery
  • Promise RAID Card Recovery
  • Adaptec RAID Card Recovery
  • Apple RAID Card Recovery
  • 3Ware RAID Card Recovery
  • Supermicro RAID Card Recovery
  • Areca RAID Card Recovery
  • CalDigit RAID Card Recovery

Why RAID Arrays fail?

Why servers lose data… Naturally, the individual media in Servers suffer from the same failure points as do drives in personal computers and workstations. However, the increased complexity of many server operating systems results in additional data loss situations:
  • RAID Drive Failure
  • RAID Controller Failure
  • RAID Array Corrupted
  • RAID Configuration Lost
  • RAID  Degradation
  • Hardware RAID Failure
  • Human Error
  • Software RAID Failure
  • Application Failure

Need our services?

If you would like to find out more and speak to a member of  The CyberTech team, then please get in touch. We’d be happy to help.

Tel +91-22 - 61473555

Email : sales@thecybertech.in